This deliverable introduces to the Reference Technology Platform (RTP) and the idea of the Human Factors (HF) RTP, which will be developed during the course of this project. Whereas the RTP is a set of pre-integrated tools and services that could be compiled and installed to satisfy the needs of a particular use case, an RTP instance is a subset of RTP components that have been integrated through a stage known as tailoring, i.e., it is a choice of tools and services out of the “library” provided by the RTP.
Public deliverables
The objective of this document is the review of Human Factors Integration Concepts and Regulations substantiated for the four HoliDes domains. In this way, the acquired knowledge gained about the possible HF input relevant to the development and qualification of systems, should serve as a basis for the further working steps within WP1: definition of an initial Project Base Line and draft of the HF-RTP architecture and methodology.
This document describes the first results on the analysis of requirements, which have been collected from the application work packages (WP6 Health,WP7 Aeronautics, WP 8 Control Rooms and WP9 Automotive) regarding their relevance for human factor modelling techniques and tools. It will describe, which techniques and tools will be used within WP2 for the HF RTP v.0.5, how the requirements have been analysed and which requirements are relevant for WP2. Furthermore, this deliverable will be input for several other WP2 tasks and Deliverables, e.g.
D2.2 Integration Plan for MTT into HF-RTP gives details on the integration of MTTs into the HF-RTP for WP2. Please refer to the common Integration Plan document for further details on the HF-RTP and possible integration techniques.
D2.2-D.5.2 Integration Plan Common part describes our plans for integration of the MTTs into a HF-RTP and the accompanying methodology, by describing the successive steps to be followed to guarantee a smooth and iterative integration in the three Project Cycles
D2.3 Catalogue for Psychological Model Assessment This deliverable consists of the elaboration of crucial HF aspects that need to be considered when constructing an AdCoS (Adaptive Cooperative System). The requirements from WP6-9 (D2.1) served as a basis. A list of exemplary requirements from D2.1 and addressed HF aspects has been compiled. Subsequently, these aspects were broken down to universal HF principles that are applicable cross-domain.
HoliDes addresses the design and the development of Adaptive Cooperative Systems (AdCoS). These systems are adapting to the cognitive abilities of the human operator(s) and facilitate cooperation between humans and machines with the goal to enhance safety, to reduce the human error risk, and to better support human operators facing too complex or critical situations.
This document aims to describe and synthetize the mapping between requirements provided by the application work package (WP6-9) and existing partner’s tools available in the WP3.
This document describes the adaptation techniques and tools and how they could be adapted to the RTP if desired.
This document serves the purpose of finding a common understanding of adaptation as well as the formulation and definition of terms all project partners can agree on. At first, the framework for adaptation is outlined theoretically, on the basis of which the project partners from different industries elaborate their AdCos and modeling approaches. This document is a living document that will evolve during the project.
This document describes the objectives, the methodology and the results of the analysis of requirements which have been collected from application work packages (WP6 to WP9) regarding their relevance for model based analysis techniques and tools.
This document gives details on the integration of MTTs into the HF-RTP for WP4. Please refer to the common Integration Plan document for further details on the HF-RTP and possible integration techniques.
This document provides the definition of metrics for requirements that have been selected within the preceding requirement analysis (Deliverable D4.1).Using such metrics, requirements imposed on particular AdCoS can be verified and if the AdCoS satisfies all the requirements then the AdCoS is qualified for usage. In the second part, this document contains brief description of model-based and empirical techniques and tools that could be used for verification of these requirements.
The objective of WP 5 is to develop techniques and tools for the empirical analysis of Adaptive Cooperative Human-Machine Systems (AdCoS) against Human Factors and safety regulations. In WP 5.1 the collected requirements of WP 6-9 were analysed both by WP5-members who were also members of one of the WPs 6-9 with domain specific expertise and other WP5-members with more experience in Human Factors. The starting point of this analysis were the requirements of WP 6-9 which were fixed in Excel tables.
This deliverable consists of two parts. The “Integration Plan Common Part” is shared by the deliverables D2.2 to D5.2. It explains how to integrate methods, tools and techniques (MTTs) into the Human Factors Reference Technology Platform (HF-RTP). The present document details the MTTs which will be contributed by WP5 as components to the HF-RTP. Details concerning the HoliDes RTP, its methodology and the integration of components can also be found in D1.1 and the forthcoming D1.3.
The overall scenario we selected to derive the requirements from WP 6: Health, is defined from point of view of a patient, who needs to have medical examinations and treatment.
Within the Holides project a number of tools and services is available or will be developed. The integration of these tools leads to the Reference Technology Platform (RTP). In this context the tools and services are also referred to as RTP-components. The RTP-components become useful when they are tailored into an RTP instance. Tailoring here means the selection of tools and services that match the needs of a specific application use case.
This document describes the results of a first attempt to model the AdCoS using the HF-RTP and methodology with pre-existing tools and provides feedback to WP1-5. The resulting requirements and specifications will further be used in task 6.3 for developing models of the AdCoS, and task 6.4 for providing the implementations.
The objective of this document is to explain the tailoring of the HF-RTP for the AdCos in the healthcare domain. It follows deliverable D6.2 and describes the use and tailoring of MTTs in the AdCos context. For each AdCos the tailoring steps as defined in D1.4 are described in more detail.
The following document describes the process of adaptation of the HFRTP, which is being developed in the HoliDes project (WP1), to the Healthcare domain, with a special focus on the description of the AdCoS and tool chains developed by the partners. It is the follow up deliverable of D6.4. It is explained how the tailoring methodology provided by WP1 is applied in the Healthcare Domain.
This document describes the final implementation of the Health AdCoS and feedback to the HF-RTP. Since there are multiple AdCoS’s for the Health domain, each chapter covers a separate AdCoS. Each chapter starts with a short AdCoS introduction, followed by a description how the MTT’s from the HF-RTP have been integrated. The benefits of the HoliDes approach for qualification and certification is described. Furthermore, an impression of the HMI is given. Finally, each chapter concludes with feedback and recommendations.
This document is the result of the analysis made by the WP7 group for the definition of methods in the assessment of target scenarios, use cases and requirements in the aeronautical domain. The document is an overview of data gathered in other documents.
The purpose of this document is to describe how the HF-RTP and methodology received from WP1 will be tailored to aeronautics domain.
In WP7 two adaptive cooperative systems are built. The first aims at supporting pilot in not quite rare situation when due to unpredictable unavailability of destination pilots need to quickly find an alternate destination considering number of complex factors. The second AdCoS considers difficulties pilots encounter when they aspire for license on new aircraft type. Typically the pilots need to undergo long and costly training regardless of their previous experience.
The main objective of this deliverable is to describe the current tailoring process in each of the two AdCoS composing the use case of the aeronautic domain.
In deliverable D7.2, which was the initial version of the tailoring process, we defined the RTP and described how the RTP can be applied in the development process of the aeronautics domain. Deliverable D7.4 was built upon the initial version by refining the tailoring steps and updating the whole process based on experiments and inputs from the preceding work packages (mainly the tailoring rules derived in WP1, D1.5). The current version of the tailoring process applied to the AdCoS is described in section 2 of this document.
This document is the result of the analysis made by the WP8 group for the definition of methods in the assessment of target scenarios, use cases and requirements in the Control Room domain.In that context, the report provides the approach used to collect the needs of the WP8 partners for requirements as well as the target scenarios and use cases. The report will describe the requirements to be delivered to WP1-5 from a Control Room perspective.
The purpose of this document is to describe how the HF-RTP and methodology received from WP1 will be tailored to control room domain. It will describe the rationale for every tailoring step and will give feedback with regard to the application of the rules. This document is the first of 4 iterations. Each iteration thereafter will add more functionality and tools into the RTP instance. For more information regarding the RTP topic please refer to D1.3.
This document describes the requirements for the AdCoS applications in the Control Room domain along with specification including use cases referred to both the Border Surveillance Control Room and the Energy Network Surveillance Control Room. It includes the results of a first attempt to model the AdCoS using the HF-RTP and methodology utilising either pre-existing and new tools to be developed in the frame of the HoliDes project. In addition, feedback from WP1-5 is reported.
The following document describes the process of adaptation of the HF-RTP, which is being developed in the HoliDes project (WP1), to the Control Room domain, with a special focus on the description of the AdCoS and tool chains developed by the partners. It is explained how the tailoring methodology provided by WP1 is applied in the Control Room Domain.
The following document describes the process of building the HF-RTP, which is being developed in the HoliDes project (WP1), to the Control Room Domain, with a special focus on the description of the AdCoS and tool chains developed by the partners. It is the follow up deliverable of D8.2. It is explained how the tailoring methodology provided by WP1 is applied in the Control Room Domain.
The present document describes the final version of the Control Room AdCoS and provides a final assessment of the HF-RTP, methodology and used MTTs against the Project Baseline. Recommendations are given for future development and usage of the HF-RTP and methodology.
The following document describes the generation of target scenarios, use cases and the derivation of requirements for the Automotive domain in the HoliDes project, a European Union Project, which aims at the development and qualification of Adaptive Cooperative Human-Machine Systems (AdCoS). The methodology is described as well as the used terminology. In the “Annex II: List of Requirements, a complete list of the currently used requirements can be found.
The following document describes the process of adaptation of the HF-RTP, which is being developed in the HoliDes project (WP1), to the Automotive domain, with a special focus on the description of the AdCoS and tool chains developed by the partners. The HoliDes project is a European Union Project, which aims at the development and qualification of Adaptive Cooperative Human-Machine Systems (AdCoS). The methodology is described as well as the used terminology.
The main objective of WP9 is the development and qualification of AdCoS in Automotive (AUT) domain using the tailored HF-RTP and methodology from WP1, to demonstrate the added value for industrial engineering processes, in terms of reduced cost, fewer necessary development cycles and better functional performances.
The following document describes the process of adaptation of the HF-RTP, which is being developed in the HoliDes project (WP1), to the automotive domain, with a special focus on the description of the AdCoS and toolchains developed by the partners. It is the follow up deliverable of D9.2. It is explained how the tailoring methodology provided by WP1 is applied in the Automotive Domain.
The following document describes the process of adaptation of the HF-RTP, which is being developed in the HoliDes project (WP1), to the Automotive domain, with a special focus on the description of the AdCoS and tool chains developed by the partners. It is the follow up deliverable of D9.4, which was the first tailoring period. It is explained how the tailoring methodology provided by WP1 is applied in the Automotive Domain.
The objective of this document is to describe the final implementation of the Automotive AdCoS, with feedback to the HF-RTP and related methodology, including the assessment against the Project Baseline. Since there are multiple AdCoS applications for the Automotive (AUT) domain, each chapter covers a separate one. Each chapter starts with a short AdCoS introduction, followed by a description how the MTT’s from the HF-RTP have been integrated. Furthermore, details about the HMI implementation are given.
This document is about the explanation of the different sections and contents of the HoliDes website. The web portal, ww.holides.eu, is one of the main contributions to dissemination activities for the HoliDes project.
This document is about the explanation of the different sections and contents of the HoliDes website. The web portal, www.holides.eu, is one of the main contributions to dissemination activities for the HoliDes project.
Considering the importance of the international partners involved in the project and of its users, the web application has been designed and built taking into consideration the specific project and its diverse areas of activity, balancing the functionality on the needs and expectations of users. It is an effective communication tool.
D10.5 documents the activities that are related to the outreach of the HoliDes project to the outside world, specifically to the exploitation activities and to the dissemination activities.
In the first part of the deliverable (D10.5 a), the exploitation activities are provided. This part includes an overview of the overall exploitation strategy and of the market innovation in the four application domains, followed by the current exploitation & business plans of the partners.